Re: Measurements: Fraction, Decimals, or Both

Subject: Re: Measurements: Fraction, Decimals, or Both
From: Michael Hopwood <Michael -dot- Hopwood -at- Gleif -dot- org>
To: "wondersofone -at- gmail -dot- com" <wondersofone -at- gmail -dot- com>, tech2wr-l <techwr-l -at- lists -dot- techwr-l -dot- com>
Date: Fri, 7 Oct 2016 14:52:37 +0000

I would need more information on the use case(s) to decide. Precision is functionally determined. Have a look at *how* the device(s) are to be used and figure out what precision (including tolerances) is actually needed to get the intended results, safely and legally.

Best wishes,

Michael

On 10/7/16, 10:01, "techwr-l-bounces+michael -dot- hopwood=gleif -dot- org -at- lists -dot- techwr-l -dot- com on behalf of wondersofone -at- gmail -dot- com" <techwr-l-bounces+michael -dot- hopwood=gleif -dot- org -at- lists -dot- techwr-l -dot- com on behalf of wondersofone -at- gmail -dot- com> wrote:

I can't make a decision. This is the first time I'm working heavily with
measurements. I'm writing home-product descriptions for nontechnical
customers. The descriptions will include measurements that I get from
multiple manufacturers. Each manufacturer writes it either in fractions or
decimals. My options are to just reflect how they write it or to pick one
method and do conversions to adhere to that one method I choose (convert
the fraction to decimal or vice versa). Pricision is not an issue.

Though, I am leaning towards using only decimals since I can't use
superscripting and subscripting to format fractions. So I could get
measurements like 5 1/4' x 11 3/4' x 1 1/8' that might annoy customers
because the numbers could seem to run into each other making it more
difficult to read.

I've also considered using hyphens between the mixed numbers, but am not
sure if that might cause other confusion when reading. E.g., 5-1/4' x
11-3/4' x 1-1/8'.

These types of measurements could appear in bulleted lists or in
narratives.

Anyone have an opinion one way or another? Or know of any "industry"
standards, unspoken rules, or no-nos about converting someone's
measurements?
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Visit TechWhirl for the latest on content technology, content strategy and content development | http://techwhirl.com

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You are currently subscribed to TECHWR-L as Michael -dot- Hopwood -at- gleif -dot- org -dot-

To unsubscribe send a blank email to
techwr-l-leave -at- lists -dot- techwr-l -dot- com


Send administrative questions to admin -at- techwr-l -dot- com -dot- Visit
http://www.techwhirl.com/email-discussion-groups/ for more resources and info.

Looking for articles on Technical Communications? Head over to our online magazine at http://techwhirl.com

Looking for the archived Techwr-l email discussions? Search our public email archives @ http://techwr-l.com/archives




^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Visit TechWhirl for the latest on content technology, content strategy and content development | http://techwhirl.com

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You are currently subscribed to TECHWR-L as archive -at- web -dot- techwr-l -dot- com -dot-

To unsubscribe send a blank email to
techwr-l-leave -at- lists -dot- techwr-l -dot- com


Send administrative questions to admin -at- techwr-l -dot- com -dot- Visit
http://www.techwhirl.com/email-discussion-groups/ for more resources and info.

Looking for articles on Technical Communications? Head over to our online magazine at http://techwhirl.com

Looking for the archived Techwr-l email discussions? Search our public email archives @ http://techwr-l.com/archives


Previous by Author: RE: Interesting job description
Next by Author: RE: Question about pay rates
Previous by Thread: Re: Measurements: Fraction, Decimals, or Both
Next by Thread: Interesting job description


What this post helpful? Share it with friends and colleagues:


Sponsored Ads